Haga Defense

Bren 2 Lower Receiver

New for Gen 3: The latest version of the Haga Defense Bren 2 Lower Receiver now has built-in ambidextrous slide release controls, is lighter and includes US made slide release and disassembly pin...

Bren 2 Tailhook Adapters

Tailhook adapter for the factory CZ Bren 2 stocks. There are two types of stock so be sure to choose the proper adapter when building your brace! See image below for identification. Non-adjustable...

Bren 2 UBR® Stock Kit

LIMIT ONE - In an effort to help get these into the hands of all of those who have been waiting I am limiting these to one per customer until further notice. Attempts to make additional orders will...

Bren 2 Wobble Fix kit

Assortment of ring shims that when installed between the factory rear sling bracket and receiver can eliminate the wobble in the factory brace/stock adapter. The kit includes .045, .03, .025, .02 amd...

Bren 805 Lower Receiver

Custom lower receiver for the CZ Bren 805 that can accept AR grips.  This part is manufactured from Nylon using a process called Multi Jet Fusion or MJF. The parts are then sandblasted, dyed and...

Buttpad for Brace-to-Stock Conversion

Buttpad for converting Tailhook and Strong Arm pistol brace setups into rifle stocks. CNC 6061 Aluminum with injection molded rubber insert. Weight: 2.9 oz Attaching a stock to a pistol makes it an...

CMR-30 Folding Charging Handle

Folding charging handle for the CMR30. Machined from 6061 aluminum and anodized black. Includes handle for one side and a flat delete for the other. Can be installed on either side. Video below shows...

CMR-30 M-LOK® Bottom Cover

This M-LOK® bottom cover is a direct replacement for the factory picatinny rail.  Provides a lighter accessory mounting solution that is also easier on the hands. 6061 Aluminum anodized...

CMR-30 M-LOK® Handguard (Long)

Handguard replaces that ugly 6" of dead space on your Kel-Tec CMR-30 with add length of picatinny rail, M-LOK® slots on the sides and bottom, QD sling mounting points and most importantly a much...

CMR-30 M-LOK® Handguard (Short)

Handguard replaces about 5" of dead space on your Kel-Tec CMR-30 with add length of picatinny rail, M-LOK® slots on the sides and bottom, QD sling mounting points and most importantly a much...

CMR30 Butt-Pad

Enhanced buttpad for the kel-Tec CMR30. New for GEN 2: The CMR30 buttpad has been completely redesigned around an A3 Tactical rubber insert allowing for a less bulky and more streamlined look. Also...

CMR30 Cheek Rest

Cheek Pad for the Kel-Tec CMR30.  Used for a much more comfortable cheek weld vs the metal rails when shooting the CMR30. Quick and easy to install/remove without tools. Weight: 1.0...

CMR30 Fake Suppressor

The CMR30 Fake Suppressor will give you that suppressed look while acting as a simple barrel shroud to cover up 6" of barrel length. The built in muzzle device extends 1" past the end of the...

CP33 AFG

Angled Foregrip (AFG) for the Kel-Tec CP33. Includes built-in handstop that doubles as a textured barrier stop. Replaces the factory MLOK panel and installs with included hardware. This part is...

CP33 Extended Handguard

MP7 inspired Handguard for the CP33 is designed to give your CP33 that MP7 front end look while adding MLOK mounting options and additional top rail space.  This handguard is designed to be used...

FN SCAR Tailhook Adapter

Tailhook brace adapter for the FN SCAR. Intended for use on aftermarket SCAR receivers like the Cypher X which built as pistols. Replaces the buttstock and installs using reused factory hardware...

GHM Butt-Pad

Replacement butt-pad for B&T GHM telescoping stocks. Perfect for those going through the SBR process and looking to swap out their tailhook adapter with an actual butt-pad. Or looking to replace...

Haga Defense 556 Muzzle Brake (HDB)

The Haga Defense 556 Muzzle Brake or HDB is designed to reduce felt recoil and muzzle rise on 556/223 caliber rifles and pistols. Pre drilled for pin and weld applications. Includes new crush washer...

Haga Defense Hat Gen.2

A sweet ass hat with the "HD" logo on front and "Haga Defense" text on the back. The original Flexfit cap. Only Flexfit offers the patented poly-weave spandex to assure you get the perfect fit...

HTI Bolt Knob

Replacement bolt knob for the Desert Tech HTI rifle.  Because your big awesome expensive rifle deserves way better than a plastic ball.  Machined from 6061 aluminum and hardcoat anodized...

KSG/KS7 Enhanced Lock Button

The Haga Defense Enhanced Lock Button replaces the factory lock button and is easier to reach and operate (especially when wearing gloves). It also makes for an excellent finger rest...

KSG/KS7 Minimalist Top Rail

The Haga Defense Top Rail for the KSG/KS7 replaces the entire Keltec "carry handle/sighting solution" assembly or rail with a more clean looking/compact option for mounting the sights or optic of...

M-LOK® Aluminum Rails

M-LOK® Aluminum Rail.  Machined from 6061 aluminum and hardcoat anodized black (Mil-A-8625 Type III Class 2). Mounting Hardware included. Made in the U.S.A. 

MP5 Butt-Pad for B&T Telescoping Stock

Replacement butt-pad for B&T MP5 telescoping stocks. Perfect for those going through the SBR process and looking to swap out their tailhook adapter with an actual butt-pad. Machined from 6061...

MP5/MP5K Flared Magwell

Flared Magwell from Haga Defense greatly improves the speed and process of mag changes with the MP5/MP5K and clones. This is the Gen. 2 model which includes the following improvements: Reduced the...

P90 M-LOK® Supressor Handguard (Nylon)

COMPATIBILITY: Because of recent changes to the PS90 by FN this handguard no longer fits all variants. Newer PS90s are wider at the front of the receiver which prevents the handguard from fitting...

P90/PS90 Cheek Riser

Riser Helps get your eye lined up with aftermarket optics for much improved shooting and consistency.  This part is manufactured from Nylon using a process called Multi Jet Fusion or MJF. The...

P90/PS90 Stock Extensions

Lightweight P90/PS90 Stock Extensions available in 1", 2", 3" and 4" lengths.  Weights: 1" - 2.0 oz 2" - 2.9 oz 3" - 3.9 oz 4" - 4.8 oz These parts are manufactured from Nylon using a process...

PC Charger Front Rail (Digital)

I have decided to stop development of this product. In order to keep the rail in-line with the rail on the receiver the part is very thin and there isn't much space to work with. For this reason I...

PS90 M-LOK® Handguard (Aluminum)

COMPATIBILITY: Because of recent changes to the PS90 by FN this handguard no longer fits all variants. Newer PS90s are wider at the front of the receiver which prevents the handguard from fitting...