Optics Mounts

SIDELOK – Aimpoint ACRO Mount

Experience the Future of Optics Mounting with the Sidelok Aimpoint Acro Mount Are you ready to revolutionize your Aimpoint Acro setup with a mounting system that combines lightning-fast deployment, unwavering stability, and absolute co-witness? Look no...

DOT MOUNT FOR AIMPOINT® MICRO – 1.93″ HEIGHT

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail...

DOT MOUNT FOR AIMPOINT® MICRO – LOWER 1/3 (39MM HEIGHT)

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and...

DOT MOUNT FOR TRIJICON® RMR/SRO and Holosun® 507/508 – 1.93″ HEIGHT

The 1.93 inch height DOT Mount™ for Trijicon RMR/SRO by Reptilia is a lightweight, slim-line mounting solution for a number of red dot optics that utilize the RMR mounting geometry. Machined from billet 7075-T6 aluminum with Milspec Type III hard...

DOT MOUNT FOR AIMPOINT® ACRO P1/P2 AND STEINER® MPS – 1.93″ HEIGHT

The 1.93 inch height DOT Mount™ for Aimpoint ACRO by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount...

DOT MOUNT FOR AIMPOINT® ACRO – LOWER 1/3 (39MM HEIGHT)

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and...

DOT MOUNT FOR AIMPOINT® ACRO and STEINER OPTICS® MPS™ – LOW HEIGHT

Introducing the ultra Low Height DOT Mount™ for Aimpoint® ACRO™ and Steiner Optics® MPS™ by Reptilia is a lightweight, slim-line mounting solution for allowing for co-witness with BUIS on subguns and AKs with gas tube with 1913...

CompM5 Series Standard (Low) Mount

For Aimpoint® Micro T-1/T-2 and CompM5/M5s series sights. Fits on ONLY Picatinny rail. Will not fit Weaver spec rails. Includes: screws and tool. Also fits Micro series sights.

Micro® T-1 & T-2 Standard (Low) Mount

Micro™ Standard Mount for T-1 & T-2 Kit

Low Profile Optics Mounts for P90/PS90

Seamlessly integrate popular optics into the FN P90/PS90 using this low profile mount. Optic mounts are designed to reduce the height over bore issues typically associated with the P90/PS90, provide a more natural/comfortable cheekweld, and also reduce...

SIDELOK – Aimpoint Micro Mount – Lower 1/3 Co-Witness

Sidelok is a groundbreaking Quick Detach (QD) mounting system for optics. It eliminates the need for tools, levers, or oversized knobs, offering a simple push button design for securely mounting any optic to a picatinny rail. The system guarantees...

RMR® Mount (Low Profile)

Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum and Finished in a Matte Black Anodiz Low Profile 0.40" Saddle Height Positions RMR® at a Low Enough Height to Achieve a Comfortable Cheek Weld and Correct Sight Alignment on Most Shotguns...

RMR® Mount (Absolute Co-witness)

Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum and Finished in a Matte Black Anodize 0.87" Saddle Height Positions RMR® at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights Utilizes Locking Torx...

RMR® 45 Degree Angle Mount

Precision CNC Machined from 6061-T6 Aircraft Aluminum and Finished in a Matte Black Anodization Low Profile Torx Locking Screw Base with Squared Recoil Stops for a Secure Zero Hold Significant Lightening Cuts Reduce Overall Weight and Bulk Includes...

RMR® Mount (1/3 Co-witness)

Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum and Finished in a Matte Black Anodize 0.95" Saddle Height Positions RMR® at the Correct Height for a Lower 1/3 Co-witness with Standard Height AR Iron Sights Utilizes Locking Torx Screws...

MRO Mount (Absolute Co-witness)

UTG MRO Absolute Co-witness Riser Mount Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum and Finished in a Matte Black Anodize 0.73" Saddle Height Positions MRO®/MRO® Patrol at the Correct Height for an Absolute Co-witness in line...

AR7 Picatinny/Weaver Rail Adapter

UTG Dovetail to Picatinny Mount Adpatper for mounting optics that require a Picatinny/Weaver Rail on your Henry U.S. Survival AR-7.  Matte Black Anodized 6061-T6 Aluminum Construction 3.94" Scalloped 9 Slot Picatinny Rail with 0.59" Saddle...