B&T MBT Stock with Haga Defense aluminum adapter for the CZ Scorpion.
Features:
WARNING: When the stock is locked in the folded position, lift the stock upward on the hinge to unlock it before unfolding. Failure to do so can result in damage to the hinge. Haga Defense will not accept returns due to damaged hinges.
Stock: Made in Switzerland
Adapter: Made in the USA
This is NOT a pistol brace. Attaching a stock to a pistol makes it an SBR and requires NFA approval. You are responsible for knowing and following your local/state/federal laws!
Scorpion Adapter Fit:
I have found that there may be some slight variation in fit from Scorpion to Scorpion. No matter what the reason there are some pretty simple fixes for a slightly tight or loose fit.
If you have a slight wobble it can be easily solved by placing a small piece of electrical tape as shown in the image below. This will make it nice and tight.
If your adapter is very tight going on you could try placing some oil or grease on the back flat surface of the gun as shown below. It's also not uncommon to need a mallet tap or two to go the last 1/8" or so.
If neither of these work, contact us for further support.
Curious about how B&T's "Coyote Tan" looks compared to your standard "FDE"? See the image below. The "Coyote Tan" MBT stock is shown next to parts colored in "Magpul FDE". As you can see the Coyote Tan is a little lighter than FDE and may not be a perfect match to other FDE components if that's what you're hoping for.
