Stocks and Braces

Kuna Adjustable Folding Stock

NOTICE:  Affixing this stock may convert your firearm into an NFA-regulated item and may trigger 922(r) compliance requirements.  Consult a qualified firearms attorney before installation. This...

SBPDW PISTOL BRACE

The SBPDW brings 3-position adjustability to the AR pistol. Compatible with mil-spec bolt carrier groups and buffers, the SBPDW gives you all of the advantages of a pistol with improved control by...

MAXIM PICATINNY RAIL WIDE-PISTOL BRACE

STOCK SPECIFICATIONS: Length: 4.5" - 9.28" Weight: 1.0 lb 3.2 oz  Mount Function: Telescoping Mount Height: 1.66"  Mount Width: 1.385"  Distance between rails: 1.53" DESCRIPTION: Your rear-facing...

PRS® Lite Stock

The PRS Lite Stock fits

BUFFER TUBE PLATE FOR HDA3 ADAPTERS

The Haga Defense Buffer Tube Plate for HDA3 Adapters attaches to any of our modular HDA3 stock or brace adapters and instantly turns it into a full AR15-style buffer tube interface. Unlike typical...

SBA6 Pistol Brace

SBA6™ AR Adjustable Pistol Stabilizing Brace®

1913 - EDGE Folding Stock

STOCK SPECIFICATIONS: Length: 9.5" Weight: 1 lb 1.3 oz Mount Function: Folding - Left - Straight Mount Height: 1.3" Mount Width: 1.3" DESCRIPTION: WOOX proudly introduces the 1913 Picatinny stock...

1913 - WOODY Stock

STOCK SPECIFICATIONS: Length: 9." Weight: 1 lb 5.2 oz Mount Function: Folding - Left - Straight Mount Height: 1.3" Mount Width: 1.3" DESCRIPTION: WOOX proudly introduces the 1913 Picatinny stock...

Adjustable Cheek Riser for JMAC Stocks and Braces

The CRSU Adjustable Cheek Riser is the perfect addition to your stock or brace. The CRSU is compatible with our Skeleton Stock, Triangle Stock, Arm Bar, as well as the original Russian/Bulgarian...

HDA3 Stock/Brace for SIG SPEAR

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm...

SIG 1913 THIN FOLDING STOCK 2.0

STOCK SPECIFICATIONS: Length: 9.6" Weight: 14.1 oz Mount Function: Folding - Left - Straight Mount Height: 1.25" Mount Width: 1.15" DESCRIPTION: Easily convert to or replace your MCX or MPX stock...

Strike Polymer FSA (Stock)

STOCK SPECIFICATIONS: Length: 8.5-11.0"Weight: 12.3 oz Mount Function: Folding - Right - StraightMount Width: 1.36" DESCRIPTION: Introducing the new Strike Polymer FSA (STOCK), the next evolution of...

Strike Polymer FSA (STAB)

BRACE SPECIFICATIONS: Length: 8.5-11.0"Weight: 12.0 oz Mount Function: Folding - Right - StraightMount Width: 1.36" DESCRIPTION: Introducing the new Strike Polymer FSA (STAB), the next evolution of...

UTG PRO Stock System (1913 Interface)

The Haga Defense UTG PRO Stock System combines the UTG PRO Side Folding Stock with a Haga Defense 1913 adapter for mounting on 1913/Picatinny rails. The Stock offers 5-position adjustable length with...

Sure-Lok 1913 Folding Hinge - SIG Style

The Sure-Lok™ Folding Hinge features 17-4 stainless steel MIM construction with a QPQ finish for strength, wear resistance, and corrosion protection. A push-button release allows controlled folding,...

PFS-X | 1913 Mount Folding Stock

STOCK SPECIFICATIONS: Length: 9.3" Weight: 15.0 oz Mount Function: Folding - Left or Right - Straight Mount Height: 1.25" (excluding hinge) Mount Width: 1.39" (excluding hinge) PFS-X Stock The 

SIG LOCKING STOCK HINGE ASSEMBLY, 1913 INTERFACE

Factory replacement hinge assembly for SIG MCX and MPX rifles with folding stocks. 1913 interface to attach to the back of the receiver. Includes screw to attached to stock stem. When deployed, this...

Picatinny Buffer Tube Adaptor

SPECS:  Heavy-duty side-folding mechanism constructed from 4140 steel Full-length locking lug for maximum strength Solid positive lock up in both positions Steel clamp with large surface...

BDA Arm Brace – Mil-Spec/Pistol

The Magpul BDA is an AR arm brace designed to improve the single-handed employment of large-format pistols. Through Magpul engineering and design, the BDA offers an optimized stabilizing accessory...

HDA3 Stock/Brace for AR15 with SIG Adapter

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm...

UCS Stock

STOCK SPECIFICATIONS: Length: 7.85-10.85" Weight: 1lb 2oz (without cheek riser) Mount Function: Folding - Left or Right - Canted 5° Mount Height: 1.85"  Mount Width: 1.4" (excluding...

HDA3 Stock/Brace for ACR/SCYTHE

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm...

B5 Modular Platform Stock

STOCK SPECIFICATIONS: Length: 7.75-10.0" Weight: 1lb 1oz Mount Function: Folding - Left - Straight Mount Height: 2.125"  Mount Width: 1.125" (excluding hinge) DESCRIPTION:The B5 Systems Modular...

Versa Stock

STOCK SPECIFICATIONS: Length: 9.5" Weight: 11.9 oz Mount Function: Folding - Left or Right - Straight Mount Height: 1.12" (excluding hinge) Mount Width: 1.00" (excluding...

KRISS Folding Stock (Gen 3)

STOCK SPECIFICATIONS: Length: 9.0-11.0" Weight: 11.9 oz Mount Function: Folding - Right or Left - Straight Mount Height: 1.16" Mount Width: 1.35" The KRISS G3 Folding Stock is a durable, polymer...

HDA3 Stock/Brace for Robinson Arms XCR-L

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm...

HDA3 Stock/Brace for CMMG DISSENT

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm...

HDA3 Stock/Brace for Springfield Kuna

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm...

Non-Folding 1913 Mount for SIG Style Stocks & Braces

Non-folding 1913 mount for SIG, JMAC, PMM etc style stocks and braces.  Height: 1.7"Weight: 1.2oz    

HDA3 Brace to Stock Conversion

This part converts your HDA3 brace to a stock while maintaining all of the core components of your brace to include the aluminum spine, steel folding hinge, and cheek riser. Note: NFA rules apply...