FN Herstal

SCAR Rear Plate

The SCAR Rear Plate was designed as a replacement for the OEM SCAR 15p, 16, 17, and 20 rear plate. Also great for a new build! Slick sides to prevent folding stock interference. Ambidextrious QD sling points! Comes with upgraded Torx screws.

HDA3 Stock/Brace for SCAR

***COMING SOON*** This page has been created as a placeholder. Use this page to sign up to be notified when this specific stock variant is in available. Until release, product description, options, pricing and photos are subject to change.  The HDA3...

SCAR SOCOM Extended Handguard, M-LOK®

Adds 6 inches of usable rail to the rifle Adds only 7.5 oz. to the overall weight of the rifle Features MIL-STD 1913 top rail Extremely rigid and rugged lightweight design Constructed from 6061 aluminum, and hard coat anodized for a lifetime of...

PMM SCAR 1913 ADAPTER

The PMM polymer adapter creates a secondary buffer between the FNSCAR® endplate and the PMM 1913 aluminum back plate to mitigate unwanted harmonics into the upper receiver assembly. Unlike some other products on the market, PMM’s 1913 back...

B&T MBT STOCK FOR FN FAL

B&T MBT Stock with Haga Defense aluminum adapter for the SA58 FAL PARA. Features: 8 position length adjustment Telescoping cheek riser w/ 3 position height adjustment Folds to the right canted downward 3.5 degrees Locks folded Fires folded Multiple...

P90/PS90 Extended Charging Handle

Extended and Enhanced charging handle for the FN P90/PS90. Charging handle is +8mm longer/taller than the factory charging handle, and offers aggressive serrations on both the front and perimeter surfaces for confident charging, as well as serrations on...

P90/PS90 QD Sling Mount (FRONT)

Direct mount QD sling point for the FN P90/PS90 receiver. This QD sling point is symmetric and can be mounted to either the left or right side of the P90/PS90 receiver. QD mounts are designed and tested to multi directional high pull loads and are...

P90/PS90 QD Sling Mount (REAR)

Stock side direct mount QD sling point for the FN P90/PS90. Use the drop down box to select between either Left or Right side fitment. QD mounts are designed and tested to multi directional high pull loads and are suitable for professional/duty use...

P90/PS90 Direct Light Mount, SureFire Pro

Directly mount any SureFire® Scout Pro series light to the FN P90/PS90 receiver. Designed to be low profile, light weight, and simple. The result is a clean mounting solution that allows any SureFire® Scout Pro light to be positioned on either...

Billet Aluminum Trigger for P90/PS90

Give your FN P90/PS90® a premium look and feel with the skeletonized billet aluminum trigger by Dorin Technologies. The Billet Aluminum P90/PS90® Compatible Trigger by Dorin Technologies is a premium upgrade for your P90 or PS90 firearm. This...

ERGO 2 SCAR GRIP

The ERGO SCAR and the ERGO 2 are the same shape on the outside. The ERGO 2 SCAR Grip is uniquely designed to allow installation on FNH SCAR lower receivers without additional fitting. Designed to fit FN SCAR rifles without fitting. A2 sized inner cavity...

Improved SCAR Buffer

The SCAR Buffer is designed to be used with the SCAR 16, 17, and 20 to reduce rearward impact of the bolt carrier.  This buffer is espeically helpful in combination with overgassing or suppressing, absorbing rearward bolt carrier impact. Greatly...

SCAR 17 AR Lower

The SCAR AR 17 Lower uses AR-15 trigger groups, magazine releases, grips and safety selectors as well as SR25 pattern magazines.  Please see below for additional parts needed to complete your build!   ***This lower is not a firearm and...

SCAR 16 AR Lower

The SCAR AR 16 Lower uses AR-15 trigger groups, magazine releases, grips and safety selectors as well as standard AR15 magazines.  Please see below for additional parts needed to complete your build!   ***This lower is not a firearm and...

B&T MBT STOCK FOR SCAR

B&T MBT Stock with Haga Defense aluminum adapter including enhanced buffer for the SCAR.  WARNING: When the stock is locked in the folded position, lift the stock upward on the hinge to unlock it before unfolding. Failure to do so can result in...

1913 Adapter for SCAR

The RSA-SCAR adapter will allow you to install 1913 style folding stocks/braces to your SCAR! It has a QD sling point incorporated into the bottom of the rail area to allow sling attachment on the rear! Compatible with SCAR 16/17/20 7075...

SCAR Drop-in Trigger

A drop in, complete assembly trigger for SCAR 16/17 Factory set pull weight of 3.5 lbs., with no creep The trigger makes use of your rifle's original hammer/trigger pivot pins Single stage trigger No gunsmith needed, easy to install Ready for the range,...

KDG MREX MKII Rail System

The KDG MREX MKII Rail Systems for the FNH SCAR rifle Platforms. There are a few obvious differences / updates from the original MREX. M-Lok slots are present in more locations than the previous model, spanning the entire length of the MREX MKII. M-Lok...

Scarging Handle – Ambi. Charging Handle – Black/FDE

The Scarging handle fits both 5.56 and 7.62 NATO versions of the reciprocating SCAR, and installs in seconds.The radius-faced design, and swept geometry of the Scarging Handle allows the user to achieve a more solid grasp when manipulating the bolt. This...

SSG™ Selector Set – FN® SCAR MK16/16s

The SSG™ Selector Set – FN® SCAR MK16/16s are drop-in, dual sided selectors for the FN SCAR family of weapons. Designed at the request of a deploying military unit who wanted more positive control of the selector, the SSG are compatible...

Super SCAR Trigger

The Geissele Super SCAR is designed similarly to the Geissele SSA. The Super SCAR is a 4.0lb. non-adjustable trigger that is a precision two-stage trigger and allows precise and accurate trigger control. TYPE: 2 Stage 1st Stage Weight: 2.5lbs.2nd Stage...

FN SCAR Tailhook Adapter

Tailhook brace adapter for the FN SCAR. Intended for use on aftermarket SCAR receivers like the Cypher X which built as pistols. Replaces the buttstock and installs using reused factory hardware. This part is not adjustable. Length of pull (L.O.P.) is...

P90 M-LOK® Supressor Handguard (Nylon)

The handguard mounts to the P90 with included hardware and no modifications to the firearm are required. Does not mount to the barrel. Fits all three versions of the P90 (standard, tri-rail and the USG). Inside diameter: 1.9" The handguard has M-LOK®...

P90/PS90 Cheek Riser

Riser Helps get your eye lined up with aftermarket optics for much improved shooting and consistency.  This part is manufactured from Nylon using a process called Multi Jet Fusion or MJF. The parts are then sandblasted, dyed and shotpeened for a...

P90/PS90 Stock Extensions

Lightweight P90/PS90 Stock Extensions available in 1", 2", 3" and 4" lengths.  Weights: 1" - 2.0 oz 2" - 2.9 oz 3" - 3.9 oz 4" - 4.8 oz These parts are manufactured from Nylon using a process called Multi Jet Fusion or MJF. The parts are then...

PS90 M-LOK® Handguard (Aluminum)

Machined from 6061 aluminum and anodized black (Mil-A-8625 Type III Class 2). The handguard mounts to the PS90 with included hardware and no modifications to the firearm are required. Fits all three versions of the PS90 (standard, tri-rail and the USG)...

PS90 M-LOK® Handguard (Nylon)

This part is manufactured from Nylon using a process called Multi Jet Fusion or MJF. The parts are then sandblasted, dyed and shotpeened for a strength and finish that is comparable to injection molded nylon. The part is black throughout. The handguard...