Product Description
The Haga Defense CZ Scorpion MBT Stock System integrates the premium B&T MBT folding stock with a custom-machined adapter, offering an adjustable stock solution for CZ Scorpion platforms. The B&T MBT stock features a built-in cheek riser for enhanced ergonomics, delivering rock-solid lockup in a clean, integrated package.
Specifications
- Stock: B&T MBT – folding, telescoping with 8-position length adjustment and cheek riser
- Telescoping cheek riser with 3-position height adjustment
- Folds to the right, canted downward 3.5 degrees
- Fires while folded
- Multiple QD sling mount options
- Adapter Material: 6061 aluminum
- Finish: Mil-A-8625 Type III Class 2 hardcoat anodize, black (adapter)
- Included: B&T MBT stock, Haga Defense adapter, mounting hardware
- Made in: USA (adapter); Stock manufactured by B&T (Switzerland)
Compatibility and Installation Notes
- Compatible with all CZ Scorpion models (pistol and carbine)
- WARNING: When the stock is locked in the folded position, lift the stock upward on the hinge to unlock it before unfolding. Failure to do so can result in damage to the hinge. Haga Defense will not accept returns due to damaged hinges.
- No permanent modifications required
- Fit may vary slightly between individual Scorpions. If slight wobble is present, it can be easily resolved by applying a small piece of electrical tape to the adapter interface (see image below).
- If your adapter is very tight going on you could try placing some oil or grease on the back flat surface of the gun as shown below. It's also not uncommon to need a mallet tap or two to go the last 1/8" or so.
- Color Note: B&T "Coyote Tan" is lighter than standard Magpul FDE and may not perfectly match other FDE components (see image below).
Legal Note
Always ensure your firearm configuration complies with all applicable federal, state, and local laws.
Always ensure your firearm configuration complies with all applicable federal, state, and local laws.
Installation Instructions
- Safety First: Before beginning installation, make sure the firearm is completely unloaded, the chamber is empty, and the safety is engaged. Remove the magazine, visually and physically inspect the chamber to confirm it is empty, and point the firearm in a safe direction at all times.
- No further installation instructions available at this time.
