Bren 2 Stock Shim Kit

Product Description

The Haga Defense Bren 2 Stock Shim Kit provides an assortment of precision ring shims to reduce or eliminate wobble in the factory CZ Bren 2 brace/stock adapter, allowing a tighter, more stable fit without permanent modifications. Simply install one or more shims between the rear sling bracket and receiver using the factory screw—experiment with combinations for your desired fit.

Specifications

• Material: 316 stainless steel
• Shim Thicknesses Included: (1) 0.045", (1) 0.030", (1) 0.025", (2) 0.020", (2) 0.010"
• Mounting: Installs between factory rear sling bracket and receiver (reuses factory screw)
• Made in: USA

Compatibility and Installation Notes

• Compatible with CZ Bren 2 Ms pistol and carbine models (all calibers)
• Designed to minimize wobble in the factory brace/stock adapter—various shim combinations allow custom fit
• Some residual play may be desirable to maintain easy stock removal during field stripping
• No sling bracket or screw included—reuses factory parts
• No permanent modifications required

Installation Instructions

1. Safety First: Before beginning installation, make sure the firearm is completely unloaded, the chamber is empty, and the safety is engaged. Remove the magazine, visually and physically inspect the chamber to confirm it is empty, and point the firearm in a safe direction at all times.
2. Remove the factory brace or brace end cap.
3. Remove the factory sling bracket using a T25 Torx wrench (caution: this screw is easy to strip if using incorrect tools).
4. Reinstall the factory sling bracket with one or more shims placed between the receiver and bracket—experiment with combinations of the included 0.045", 0.030", 0.025", 0.020", and 0.010" shims to achieve your desired fit.
5. Reinstall the factory brace.