B & T

SUPER APC Trigger

The Super APC trigger is designed for use in across B&T Semi-Automatic APC, SPC, and GHM (9/40/10/45/556/300 – APC Lower) Weapon Platforms with the same crisp single stage feel and quick reset of the Geissele Super 3 Gun. Trigger pull weight is...

B&T APC Pro Extended Folding Charging Handle

HBI's extended folding charging handle for the B&T APC9/45/223/300 Pro models features a machined aluminum finger catch that is 6mm longer than the factory B&T folding charge handle. The finger catch lever is held under tension by a spring-loaded...

B&T GHM/KH9 Butt-pad (telescoping stocks)

The Haga Defense Butt-Pad is a premium replacement for the butt-pad or brace adapter on B&T GHM and KH9 telescoping stocks/braces. Machined from 6061 aluminum with a hardcoat anodized black finish, it includes a genuine Magpul MOE SL rubber pad for...

B&T GHM 1913 Adapter

1913 Picatinny Rail Adapter for mounting stocks/braces on the B&T GHM.

HDA3 Stock/Brace for B&T APC (rifle caliber)

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm platforms without sacrificing strength or aesthetics to do...

HDA3 Stock/Brace for B&T APC (pistol caliber)

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm platforms without sacrificing strength or aesthetics to do...

HDA3 Stock/Brace for B&T GHM

The HDA3 is a modular stock/brace system developed from a collaboration between Haga Defense and A3 Industries. The HDA3 was designed specifically to integrate seamlessly across dozens of firearm platforms without sacrificing strength or aesthetics to do...

Telescoping Stock/Brace for B&T APC

Neoteric Designs introduces the PDW style telescopic stock for the B&T APC (rifle & pistol calibers). Light weight construction made out of Multi Jet Fusion Nylon 12 material and steel rails with Nitrite Black finish, this stock base is extremely...

B&T TP9 1913 Adapter

The Haga Defense 1913 Adapter for the B&T TP9 mounts at the rear of the gun, replacing the factory stock or brace to provide a Picatinny (1913) rail for mounting compatible stocks or braces. Machined from 6061 aluminum with a hardcoat anodized black...

TP9 Stock Hardware

Stock hardware for B&T TP9/MP9. INCLUDES:  BT-30185 - B&T locking bar foldable stock to BT MP9/TP9 BT-30273 - B&T spring folding stock to BT MP9/TP9 BT-30116 - B&T pin folding stock to BT MP9/TP9 BT-30184 - B&T realease knob...

B&T MBT Brace Adapter

***All brace sales are Final! No returns, refunds or exchanges will be processed.*** Replaces the buttstock portion of the MBT stock with a Tailhook brace adapter. Easy to swap/install reusing factory hardware. This part is manufactured from Nylon using...

B&T APC 1913 Adapter (for SB style endcap)

Easy Installation Made to fit B&T APC9 Model Adds section of picatinny rail to back of receiver for stocks, arm braces, and sling adaptors 100 percent made in the USA - Constructed of 6061 Aluminum hardcoat anodized Weight: 3.5 oz INSTALLATION...

TP9/MP9 Folding Stock

Swiss B&T BT-30331 tactical folding stock assembly. Includes polymer stock and mounting hardware. COMPATIBILITY: TP9 MP9 GHM9 KH9 (Gen 1 only — check backplate compatibility) P26

Telescopic Stock for APC 9/40/45

B&T Stock Telescopic For APC9/40/45 Length adjustable in 3 positions Includes hydraulic recoil buffer This is NOT a pistol brace. Attaching a stock to a pistol makes it an SBR and requires NFA approval. You are responsible for knowing and following...

Telescopic Stock for APC 556/223/300

B&T Stock Telescopic For APC223/APC300 Length adjustable in 3 positions Includes hydraulic recoil buffer This is NOT a pistol brace. Attaching a stock to a pistol makes it an SBR and requires NFA approval. You are responsible for knowing and...

TP9N Foregrip

B&T Factory Foregrip for the TP9-N

APC PRO Extended Charging Handle

Ergonomic, intuitive, and designed to increase ease of pull and provide maximum purchase and leverage. Compared to factory B&T stock charging handle, this extended folding charging handle will provide much needed purchase with exceptional...

MBT Stock - STOCK ONLY

B&T MBT folding stock for APC must have compatible endcap- Stock Only   Features: 8 position length adjustment Telescoping cheek riser w/ 3 position height adjustment Folds to the right canted downward 3.5 degrees Steel QD sling mount on both...

B&T SPC Butt-pad (telescoping stocks)

The Haga Defense Butt-Pad is a premium replacement for the butt-pad or brace adapter on B&T SPC telescoping stocks/braces. Manufactured from 6061 aluminum with a hardcoat anodized black finish, it includes a genuine Magpul MOE SL rubber pad for...

APC9/GHM9 Scorpion Lower

The APC9/GHM9 Scorpion Lower uses Scorpion Evo style magazines as well as AR-15 trigger groups, grips and safety selectors.  Please see below for additional parts needed to complete your build!   ***This lower is not a firearm and does NOT...

SBT-G2™ Pistol Brace

The SBT-G2™ Pistol Stabilizing Brace® is the second generation of the SBT™ and enhances your B&T APC, HK UMP, or LWRCi SMG45 with an integral, right side-folding mechanism and an arm cuff based on the SB-Mini™. The SBT-G2...

SBT™ Pistol Brace

The SBT™ Pistol Stabilizing Brace® features an integral, side-folding mechanism and fits B&T APC and HK UMP pistols. FEATURES Integral, side-folding mechanism Complete assembly, ready-to-install US veteran designed and proudly made in the...

B&T APC 1913 Adapter (pistol caliber only)

The Haga Defense 1913 Adapter enables mounting of Picatinny (1913)-compatible stocks or braces on pistol caliber B&T APC platforms, providing a robust interface for enhanced configuration options. Precision-machined from 6061 aluminum with an...

B&T APC Butt-pad (telescoping stocks)

The Haga Defense APC Butt-Pad is a premium replacement for the B&T APC telescoping stock/brace, designed for users converting to an SBR or seeking superior comfort and functionality. Precision-machined from 6061 aluminum with a durable hardcoat...

B&T Strongarm Adapter

A custom adapter that will allow you to mount a Strongarm pistol brace on a factory B&T folding stock for the TP9, MP9, GHM9, KH9 or P26 . The adapters are made from 3d printed (SLS) nylon that has been media tumbled, dyed and painted black. The...

B&T TP9 Stock/Brace Adapter (SIG Style Interface)

The Haga Defense Stock/Brace Adapter (SIG Style Interface) for the B&T TP9 allows mounting of SIG-style folding stocks or braces. Machined from 6061 aluminum with a hardcoat anodized black finish (Mil-A-8625 Type III Class 2), this adapter provides a...

B&T TP9 Vertical Grip (with SureFire Switch Pocket)

The Haga Defense Vertical Grip with Surefire Switch Pocket for the B&T TP9 provides a comfortable vertical grip with an integrated pocket for Surefire weapon light switches (switch not included). Manufactured from durable MJF nylon, this lightweight...