Accessories

Blast Can 1/2-28 Thread (5.56/9mm)

Directs muzzle blast forward on short barrel rifles and pistols. Does not reduce recoil or flash. Constructed from 6061 aluminum, and hardcoat anodized for a lifetime of service 1/2-28 threads for 5.56/.223/9mm rifles Includes new crush...

Blastwave 3-Lug QD 9mm Blast Shield

Direct concussive forces down range and away from the shooter! The Blastwave 3-lug blast shield works with any 9mm 3-lug attachment and allows for quick detachment when using a sound suppressor. Ideal for close quarters environments or shooting in teams,...

B&T QD Foregrip (short)

This short fore grip is designed to be mounted on the NAR/Picatinny rail of the gun. The grip is hollow and can be used as a storage compartment after unscrewing the bottom lid. Thanks to the QD mount, the grip can be dismounted from the NAR/Picatinny...

Picatinny Buffer Tube Adaptor

SPECS:  Heavy-duty side-folding mechanism constructed from 4140 steel Full-length locking lug for maximum strength Solid positive lock up in both positions Steel clamp with large surface engagement Can be configured to right or left folding Modular...

MLOK Grip Panels 3-Slot (3 pack)

Slate Grips are a drop in/screw on upgrade to any grip, rail or otherwise MLOK compatible system. The thin profile and raised texture offer an enhanced gripping surface for the user. These panels boast durable steel hardware and extra MLOK lugs (over...

MLOK Grip Panels 2-Slot (3 pack)

Slate Grips are a drop in/screw on upgrade to any grip, rail or otherwise MLOK compatible system. The thin profile and raised texture offer an enhanced gripping surface for the user. These panels boast durable steel hardware and extra MLOK lugs (over...

MLOK Grip Panels 1-Slot (3 pack)

Slate Grips are a drop in/screw on upgrade to any grip, rail or otherwise MLOK compatible system. The thin profile and raised texture offer an enhanced gripping surface for the user. These panels boast durable steel hardware and extra MLOK lugs (over...

Suppressor Mount Shims

Precision shims for properly timing your muzzle devices, ensuring optimal alignment. Made from stainless steel here in the USA. Key Features: Kit includes thread pitch specific shims for optimal timing Precision manufactured here in the...

KRISS Vertical Grip Handstop w/ pad (Gen 3)

The KRISS G3 M-LOK Enhanced Vertical Grip is a polymer grip designed for superior control and stability and features an integrated finger stop for added comfort. The enhanced version of the foregrip has removable side panels to accommodate pressure...

KRISS Pistol Grip (gen 3)

The KRISS G3 Pistol Grip is a high-quality polymer grip designed for comfort and durability. It attaches securely using a standard AR15/M4 grip screw and washer. This grip is compatible with Mil-spec AR lowers, providing a solid and ergonomic upgrade to...

Non-Folding 1913 Mount for SIG Style Stocks & Braces

Non-folding 1913 mount for SIG, JMAC, PMM etc style stocks and braces.  Height: 1.7"Weight: 1.2oz    

HDA3 Brace to Stock Conversion

This part converts your HDA3 brace to a stock while maintaining all of the core components of your brace to include the aluminum spine, steel folding hinge, and cheek riser. Note: NFA rules apply. Ensure all conversions are done in compliance with...

HDA3 Stock to Brace Conversion

This part converts your HDA3 stock to a brace while maintaining all of the core components of your stock to include the aluminum spine, steel folding hinge, and cheek riser.  Note: NFA rules apply. Ensure all conversions are done in compliance...

CTR® 0.75" Cheek Riser

Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 3/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is...

CTR® 0.50" Cheek Riser

Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 1/2 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is...

CTR® 0.25" Cheek Riser

Clip on cheek riser for CTR, MOE®, DT, and PR Carbine stocks. Raises cheek weld 1/4 inch in height. This riser is typically for use on non AR15/M4 applications as the riser will interfere with charging handle function unless the stock is...

AK Cheek Riser-High

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Raises the cheek weld .75" in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in the USA. Available Sizes:1/4" Low - CLICK...

AK Cheek Riser- Medium

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Raises the cheek weld .5" in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in U.S.A. Available Sizes:1/4" Low - CLICK...

AK Cheek Riser- Low

Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Raises the cheek weld .25" in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Made in the USA. Available Sizes:1/4" Low - CLICK...

A3 Steady Brace (Aluminum)

Introducing the Steady-Brace Modular Pistol Stabilizer.  The Buffer tube mount variant clamps to any Mil-spec buffer tube, or any point designed for Gearhead Works Tailhook mounting. Simply slide it on and tighten the 2 screws. This design is also...

M-LOK Replacement Hardware

The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with most M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two 10-24x3/8"...

TAB Handstop with Cable Management

TAB Handstop Enhance your firearm control and versatility with the TAB (Tactile Accessory Boss), a modernized vertical forward grip designed for enhanced feel and precision during rapid fire and quick target transitions. The TAB positions your support...

SHIFT (Reversible) Handstop - Carbon Fiber

Description: Our Shift™ Handstop integrates form with functionality. The shape works as a comfortable handstop when going with the thumb over method or even when reversed. Some prefer their pinky in the groove, others have found their ring finger...

Shape Shifter

The Shape Shifter is a new, Patent Pending accessory attachement system. It was developed to be a rigid, modular system for attaching grips to an m-lok rail by the use of a center "post" to provide backing to the accessory.  The stability of an...

XENO TRIAD

The XENO TRIAD grip is a reduced angle AR-based grip, designed for compact weapons such as CQC-style tactical firearms. The near vertical nature of the TRIAD grip promotes an optimized wrist angle, ensuring a comfortable ergonomic hand-hold in close...

Picatinny Side Folding Stock Adapter

FOR ANY 1913 RAILED RECEIVER TO MCX/MPX STYLE STOCK The Samson Picatinny Side Folding Stock Adapter is a robust and versatile solution for shooters seeking superior adaptability and precision. Designed to seamlessly integrate with a variety of platforms,...

Arm Brace Hook

ARM Brace Tailhook designed for pistols with 1.2" diameter tube Features QD sling swivel Fits MI-AK-ALPHA-FS/MI-AK-ALPHA-FBS/MI-AK-ALPHA-FBSF/MI-STAP-SF-PB/MI-STAP-PB Ambidextrious design Hard Coat Anodized 6061 Aluminum Made in the USASold as ARM Brace...

WML White - Gen 3

INFORCE is back with its newest generation of weapon mounted lights. Brighter and more powerful than ever before, the INFORCE WML White Gen 3 offers users more than twice the beam intensity of the original on a single CR123a battery without compromising...

Kinect Surefire Pro Mount

Kinect is a revolutionary QD mounting system that changes the way we use MLOK accessories. Similar to Sidelok, Kinect ensures proper and easy installation, eliminating variables that would cause common issues such as over tightening, and fiddling with...

JMAC 2 Port Recoil Reduction Devices

The RRD-2C is a shortened version of JMAC's popular RRD-4C muzzle brake. The RRD-2C was created by removing the 2 smallest ports from the RRD-4C, creating a more compact package while still maintaining the ability to mitigate recoil...