HK G36 Enhanced Cheek Riser

Product Description

The Haga Defense Enhanced Cheek Riser for the HK G36 elevates your cheek weld by approximately 20mm, providing perfect eye alignment with factory iron sights and improved comfort when using optics or red dot sights. This accessory attaches to the factory stock without modifications, offering reliable performance in a lightweight design.

Specifications

• Material: High-strength durable nylon
• Color: Black
• Height Increase: Approximately 20mm
• Included: Cheek riser, mounting blocks, and mounting hardware
• Made in: USA

Compatibility and Installation Notes

• Compatible with HK G36 Standard, K, C, clones, and .22LR stocks (airsoft compatibility unknown)
• Attaches to factory stock (does not interfere with stock folding or firing while folded)
• Tools required: 5mm and 3mm hex wrench/driver
• No permanent modifications required

Installation Instructions

1. Safety First: Before beginning installation, make sure the firearm is completely unloaded, the chamber is empty, and the safety is engaged. Remove the magazine, visually and physically inspect the chamber to confirm it is empty, and point the firearm in a safe direction at all times.
2. Press the mounting blocks into each side of the stock (left or right doesn't matter; ensure the two circular cutouts on each part are facing down to allow continued use of the takedown pin retaining holes).
3. Tighten the mounting blocks with the included screw and nut using a 5mm hex wrench or driver.
4. Slide the cheek riser over the stock and mounting blocks until the screw holes align with the threaded inserts.
5. Install and tighten the four mounting screws with a 3mm hex wrench or driver.