CMR-30 Extended M-LOK Handguard - Long

Product Description

The Haga Defense Extended M-LOK Handguard (Long) for the KelTec CMR-30 replaces the factory handguard, eliminating the 6" of dead space with added length of Picatinny rail on top, M-LOK slots on the sides and bottom, QD sling mounting points, and a much improved forward grip position. This kit also replaces the factory bottom Picatinny rail with M-LOK slots for a modern, functional upgrade.

Specifications

• Material: Durable MJF nylon
• Color: Black
• Features: Extended top Picatinny rail, M-LOK slots on sides and bottom, QD sling mount, improved forward grip position
• Included: Handguard, M-LOK rail, mounting hardware
• Made in: USA

Compatibility and Installation Notes

• Compatible exclusively with the KelTec CMR-30
• Replaces factory bottom Picatinny rail with M-LOK slots
• No permanent modifications required

Installation Instructions

1. Safety First: Before beginning installation, make sure the firearm is completely unloaded, the chamber is empty, and the safety is engaged. Remove the magazine, visually and physically inspect the chamber to confirm it is empty, and point the firearm in a safe direction at all times.
2. To install, remove the lower Picatinny rail and the factory barrel block.
3. This handguard mounts by replacing the factory barrel block, which provides a very solid mount.
4. The handguard slides over the barrel using high-temp o-rings just like the factory barrel block.
5. The top screw on your factory barrel block will be reused in the same position. The others will be replaced with those included in the kit.
6. Important: DO NOT OVER TIGHTEN THESE SCREWS! They are threaded into nylon and will strip easily. They don't need to be very tight.